Zombies!!! Card tray and playing piece bins.

This is how the box should have been designed...

Whoops! I have been working on trays for my Zombies!!! game and TWICE I freakin' miscalculated. At least on the first tray I caught it on the mock-ups. I just finished the larger tray which is supposed to optimize space in the box and it did just the opposite... Not sure what I was thinking. I guess I was a little rushed when I started designing the schematic. I even printed it today once and saw before cutting it was off and missing parts and edited it. Oh well.

New schematic done.

The one thing that sucks is that I am running out of paper. I get these design magazines that have paper sample in them - you know the ones that are all stiff and make it difficult to thumb through the magazine? I have been using those cause they are pretty heavy. I'd guess 60#-100# card stock. Plus, because they are printed on, they make interesting trays.


The card tray:

The mockup shows what it looks like with the cards in the tray

The playing piece bin-tray:

Nice - but way too big for its intended purpose

The re-engineered bin(s)

After making a bin that worked, I decided to make two bins with subdivisions for all the game pieces. Bonus, the bins are designed to be used during game play.

Naturally, I ate out of bins!

Bins keep things neat.

For more pictures and description:
Flickr set for the playing card tray

Flickr set for the playing piece bins

2006 number1

Inspired by art found in the movie "Heathers" 38x28"

2005 Christmas Card

This isnt made from a pizza box, but its made from paper...





I Designed in Adobe Illustrator and Photoshop. Printed with an Epson C80 on Simpson Evergreen paper. Hand trimed with a straight edge and a rule. Hand folded. Made about 50 of these.

Pizza Box Popcorn Bowl

Bowl fits the average 3 oz microwave popcorn bag.

Materials: Empty pizza box, an Xacto knife or scissors, masking tape, a pen, and one 3 oz. package of microwave popcorn, popped.


See my Flickr set for complete instructions

DIY Wine Rack from a Box

Do it yourself wine rack with a an Amazon box:



I am thinking I want to keep them on. I have a few of these boxes. That means you can make stackable wine racks.



To start, make some templates of the wine bottle girth. By lying the bottle in the box, you can get an idea of how the bottle will sit. Remember, the bottle should tilt towards the cork. You can achieve this by making the bottom of opposing cutouts at the same height.

Tip: use the widest bottle you have to make the templates.



You can see I sketched out traces of both ends of the bottles (inner circles) then I roughly sketched out the shapes I will cut out. (I used previously used paper in order to conserve.) I've also added about 3/16ths of an inch to the the trace. The bottle will still sit snuggly, but not pinched.

Afterthought: I discovered after cutting I made the neck slots a little too wide.

Now I will cut these out and trace them on to the sides of the box. Use a ruler or such to line up the center of the cutouts on the opposing sides. Since this the mock-up, I am just eyeballing it. You can also measure from the edge of the box equal distances on both sides and align the center of the cutouts to those markings. Aw, heck, I'll measure mine too. My box is about 12 inches wide so that will be the center of my center cut outs. Once that cut out is marked, I'll eye ball the left and right cutouts, centering them in the space.

Tip: you can find the center of the cutout by folding it in half.

I've taped the cutouts on the same side to check the depth. I can probably add a quarter inch to the depth of the cutouts you can also see that we'll get about three bottles in this wine rack. Alternating the direction of the bottles and squeezing them together you might be able to rack 4 bottles. For this mock-up I am just going to accommodate 3 bottles in the same direction.



Now I will trace the cut outs on both sides.



After the cut outs are traced, I cut them out with an Xacto knife.


Here is the wine rack with bottles in it.



Here is the wine rack with the flaps taped into position.






Tip: If you use boxes of the same size, you can stack these. Now you can stack them in a cabinet or closet. If your wine racks are out in the open, cover them with contact paper before cutting. Or, you can paint them. The cardboard soaks up paint, so be sure to use a primer.

Wii Controller Holster

Everyone needs a place to store the controllers! My latest frozen pizza box project is a Wii controller and nunchuck holder.






See my Flickr photo-set.

Materials:
frozen pizza box
dry cleaning hanger
X-acto knife
ruler
pencil
white glue

Step one: sketch out the pattern on a piece of paper. The controller pocket is 1.5 x 1.25 x 6 inches. The nunchuck pocket is 2.5 x 1.75 x 5 inches. That back piece is 5 x 6 inches. I used an extra 2 in on three sides, folded back and glued down to re-enforce the back piece, make it stiffer. The hanger is bent to fit the end of my desk.

Step two: carefully open the glued end of the frozen pizza box . Using the ruler and pencil draw the pattern on the cardboard. You should be able to get both pockets on one side of the pizza box.

Step three: DOUBLE CHECK THE DIMENSIONS. My first pass through I made two controller pockets. Didn't realize it until I glued them down. Had to tear it apart and reglue new pockets.

Step four: Carefully use the X-acto and ruler to cut out the pockets and back piece. Use the back of the X-acto to lightly score the folding lines.

Step five: Bend the folds. You can lay the ruler against the bend to help keep the bend straight.

Step six: Once all the pieces are cut and bent, start gluing the pockets. I glued the pockets first before I glued the back. It's best to use a scrap of cardboard to spread the glue evenly and completely.

Step seven: Carefully bend the hanger to the dimensions you need. I used some pliers to help. I began bending by making the hanger straight. For the hanger that is under the cardboard its best to extend both ends so they overlap.

Step eight: lay out the bent hanger and carefully cut two holes just below the fold on the back. You should be able to insert the hanger without unbending it. Once the hanger is in, you can glue down the flaps. Its ok to liberal with glue on the area the hanger is against the cardboard.

Your done! Give it time to dry before using.

Extra: you can paint it or color it!